888-934-7463 (Toll Free)
205-942-2073 (Fax)
mail@precisiongrinding.com  (e-mail)

Adding Value to Steel Plate Since 1971

___________________________________________________________________________________________________

Measuring & Inspection Equipment

Precision Grinding, Inc. has all Micrometers Recalibrated and Certified on an as needed basis. The Machine Shop Manager is responsible for maintaining the integrity of all Measuring & Inspection Equipment.

Our Measuring Equipment includes, but is not limited to, the following:

A. Outside Mics - 0” to 6”
B. Outside Mics - 0” to 30”
C. Vernier Calipers - 0” to 82”
D. Cal–X–Tender - 0” to 51”
E. Cal–X–Tender - 0” to 71”
F. Digital Height Gage - 18”
G. Dial Bore Gage - 1.4” to 2.5”
H. Dial Bore Gage - 1.4” to 6.0”
I.  Dial Bore Gage - 3.0” to 6.0”
J.  Threaded Plug Gages - M6 thru M24
K. Threaded Plug Gages - 10-32 thru ¾-10NC
L. Small Hole Gages - .125” to .500”
M. Telescoping gages - ½” to 6.0”
N. Pin Gage Set - .061” to .750”
O. Precision Jo-Block Set - .050” to 4.000”
P. Precision 24” Master Square
Q. Precision Straight Edge - 36”
R. Precision Straight Edge - 72”
S. Mater Setting Rings - 3.0000”, 4.0000”, & 5.0000”
T. Precision Granite Surface Plates – 48” x 96” & 42” x 48”
U. Renishaw Probing Systems – Accuracy specified to 0.0005” - .0.001”
(1) 78” x 122” & (2) 30” x 60”
 

When the Machine Shop Manager assigns a job to a Machine Operator, the accuracy of the Measuring Tools is confirmed by the Machine Operator.