| AR Plates and Wear Parts |
| Liner Plates |
| A514-T1, AR400, AR500, 4140,1045 |
205-942-2073 (Fax)
mail@precisiongrinding.com
Adding Value to Steel Plate Since 1971
|
|
|
888-934-7463 (Toll Free) 205-942-2073 (Fax) mail@precisiongrinding.com Adding Value to Steel Plate Since 1971 |
WEAR PLATE, OD-ID RINGS, SEGMENTS - Mining Industrial Parts
and Heavy Use Machine Parts
Abrasion Resistant wear plates or steel liners are used in many applications where friction between two parts or materials creates degradation. Wear plates may bolt onto a machine that slides in and out or up and down in a manufacturing process, while they can also be found where manufactured parts or minerals are regularly rubbing or abrasively contacting the machined plate.
Wear plate is a type of abrasion resistant plate that is considered extremely durable, especially under harsher conditions. Digging and Mining companies face challenging requirements. Their equipment and tools are used to move dirt, rocks, minerals and elements found within the ground, subjecting the steel parts to extremely subversive and abrasive conditions. Examples of steel parts cut from AR plate used in the coal mining industry might include coal or rock shoots, as well as many other well-worn applications.
As a rule, ABR plates are quenched and tempered steels designed to bear the wear and tear of continuously course or abrasive work. Many Abrasion Resistant plates are designed to have a hard outside shell while having a softer inner core. Under extreme impact, a T1 steel may be a better choice for many applications.
Wear plates can be made of medium steel, abrasion resistant grades ranging from A514 T1 to AR400 or AR500, flame hardened grades such as 1045 or 4140 or thru hardened materials such as A2, D2, S7 and others. Abrasion resistant wear plates are designed to unbolt from your equipment, allowing you to re-grind and re-shim to the original height of your equipment or to replace with another liner.
In some cases, Precision Grinding can modify your equipment to incorporate these liner plates when not in the original equipment design. If your equipment has lost some efficiency or does not hold the same tolerances as new, inspect the worn parts. There could be an easy and cost effective fix to the problem. A company's existence depends upon productivity and the quality of its products. Wear steel is used to create a longer life investment in equipment, such as:
| Wear Blades | Choppers | Scrapers | Mining Tools | Chippers | Punch Press Applications | Wear Rings | Wear Segments | Bucket Scrapers |
When you need ground and/or machined parts, please, contact us at 888-WE-GRIND to discuss your needs.
 |
 |
|
1045 Plates on Mattison Surface Grinding Finishing Table |
Same two AR Plates - Surface Ground complete, ready for shipment. |
These Abrasion Resistant Steel Plates are made from 1045 Plate. Prior to this final grinding phase, we burned, annealed, pre-ground, machined and flame-hardened the parts. After flame-hardening, we finished these parts on one of our Mattison Surface Grinders to obtain the required flatness and parallelism tolerances. These parts are 1.50 x 9.00 x 84.00. Precision Grinding, Inc. is located in Birmingham, Alabama.
2101 Wenonah-Oxmoor Road, Birmingham, AL USA 35211 |
PHONE: 205-942-2491 FAX: 205-942-2073 E-MAIL: mail@precisiongrinding.com |